How to Build BMX Ramps!

This week I made some BMX ramps to help me get back into riding. I'm not that good,but I still had a lot of fun making them and hopefully you guys have fun making them too. If you would like to make your own, I have the shopping/cut list below!

Shopping List:
4- 2'x4' Sheets of 3/4" Plywood
2- 2'x4' Sheets of 3/8" Plywood
6- 2x4's
1- Box of 3" Exterior Wood Screws
1- Box of 1 5/8" Exterior Wood Screws

Cut List:
2- 2'x4' Sheets of 3/4" Plywood (Kicker and Landing Ramp Sides)
2- 2'x4' Sheets of 3/4" Plywood (Landing Ramp Top Pieces)
2- 2'x4' Sheets of 3/8" Plywood (Kicker Ramp Top Pieces)
8- 2x4's at 22.5" Long
8- 2x4's at 46.5" Long

Website: http://www.woodworkingnut.com/

Keek: https://www.keek.com/EricLindberg

Twitter: https://twitter.com/Woodworking_Nut
-------------------------------------------------------------------------------------------------
Music by Jason Shaw from http://audionautix.com/index.php
+