DIY Sheet Metal Bending Brake: No Welding

I decided to make a homemade sheet metal folder to bend thin metal for fabrication projects. It was simple and cheap to make and it was built with no welder.

Here is everything I used in this build:
(x1) 1/8" x 1.5" x 1.5" x 4' Steel Angle
(x1) 1/8" x 2" x 3' Steel Plate
(x1) 1/2" x 3' Steel Box
(x1) 3/4" x 2.5" x 6' Dimensioned Board
(x2) Hinges
(x6) 1" x 5/16" Cap Screws
(x6) 5/16" Lock Nuts
(x10) 1" Drywall Screws
(x2) 5/16" Wing Nuts
(x2) 5/16" Washers
(x2) 5/16" x 2.5" Carriage Bolts
(x4) #10 x 1" Flat Head Machine Screws
(x4) #10 Nuts
Wood Glue
Spray Paint Primer
Blue Spray Paint

Severe Tire Damage Kevin MacLeod (
Licensed under Creative Commons: By Attribution 3.0 License

My Tools & Gear (These links are using my Amazon Affiliates account so I get a small commission if you use them. You pay the same price and help support these videos at the same time. Thanks!):

Small Tripod:
Big Tripod:

Hacksaw (Similar to mine):
Miter Saw:
Circular Saw:
Rotary Tool (A newer version of mine):
Forstner Bits (A larger set, same brand):
Drill Bits (I have a cheaper set, but I like these):
Metal File (Similar to mine):
Box Wrenches:
Allen Keys (Like mine):